Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Parker Forums Parker Reproductions

Notices

Reply
Thread Tools Display Modes
Broke Ejectors
Unread 11-30-2020, 07:33 PM   #1
Member
joe breda
PGCA Member

Member Info
 
Join Date: Sep 2012
Posts: 48
Thanks: 0
Thanked 112 Times in 20 Posts

Default Broke Ejectors

Has anyone experienced a broke/snapped ejectors in their Parker reproduction?
BTW,... Iíve had both the left and Right ejectors kickers snap off, right where the 1/2 round rod meets the rim face plate. They snapped appx. A month apart time wise. I shoot skeet with the gun 3 days a week and have put thousands of rounds through it. Itís the 28ga DHE.
Fortunately I was able to repair them by precisely rigging them and clamping.
I also ground a chamfer before welding. The hardest part was filling down the welding and refitting them.
NOTE: the originals have a sharp corners where the 1/2 rod meets the rim face plate. I think this helps them snap ?
So when I filed and fit I left a small radius in the corner for additional strength!
Hence I also needed too cut a small chamfered counter sink at the top of the hole they fit into to allow clearance for the radius I left.
All back together now and working fine again,
Just wanted to let all the folks know, that this is fixable if any of yours snap ?
The fix is somewhat intricate and time consuming, but better than trying to find a replacement. Good luck with that one !
The KEY is in rigging before weld ! ! !
joe breda is offline   Reply With Quote
Unread 11-30-2020, 07:51 PM   #2
Member
Robert Brooks
PGCA Member

Member Info
 
Join Date: Aug 2009
Posts: 214
Thanks: 1,189
Thanked 105 Times in 76 Posts

Default

Great job! Bobby
Robert Brooks is offline   Reply With Quote
Unread 12-01-2020, 11:08 AM   #3
Member
Mike of the Mountain
PGCA Member

Member Info
 
Join Date: Feb 2014
Posts: 1,455
Thanks: 4,933
Thanked 2,522 Times in 720 Posts

Default

NICE!!!!
Mike Koneski is offline   Reply With Quote
Visit Mike Koneski's homepage!
Unread 12-01-2020, 11:33 AM   #4
Member
Dave Wunrow
PGCA Member

Member Info
 
Join Date: Dec 2008
Posts: 13
Thanks: 0
Thanked 0 Times in 0 Posts

Default

Joe please check your private messages.
Dave Wunrow is offline   Reply With Quote
Unread 12-01-2020, 12:31 PM   #5
Member
joe breda
PGCA Member

Member Info
 
Join Date: Sep 2012
Posts: 48
Thanks: 0
Thanked 112 Times in 20 Posts

Default

Some members have requested my contact info.
Blackjackcash@cs.com
I assume for more information concerning Parker parts
Or how to repair parts ?
Please add Parker Parts in the subject line
So I don’t miss your inquiry.
Glad to help in any way ��
joe breda is offline   Reply With Quote
The Following User Says Thank You to joe breda For Your Post:
Unread 12-01-2020, 12:33 PM   #6
Member
joe breda
PGCA Member

Member Info
 
Join Date: Sep 2012
Posts: 48
Thanks: 0
Thanked 112 Times in 20 Posts

Default

Wrong email
Blackjackcash2@cs.com
joe breda is offline   Reply With Quote
Unread 12-01-2020, 12:39 PM   #7
Member
B. Dudley
PGCA Lifetime
Member
 
Brian Dudley's Avatar

Member Info
 
Join Date: Aug 2011
Posts: 8,603
Thanks: 378
Thanked 11,681 Times in 3,313 Posts

Default

Joe,

I recommend updating your advertisement in Parker Pages as there have been reports of that contact info being no good.
__________________
B. Dudley
Brian Dudley is offline   Reply With Quote
The Following 2 Users Say Thank You to Brian Dudley For Your Post:
Visit Brian Dudley's homepage!
Unread 12-01-2020, 02:03 PM   #8
Member
Keavin Nelson
PGCA Lifetime
Member
 
keavin nelson's Avatar

Member Info
 
Join Date: Sep 2009
Posts: 510
Thanks: 2,681
Thanked 646 Times in 209 Posts

Default

Nice repair, Tig welded ?
__________________
Keavin Nelson
keavin nelson is offline   Reply With Quote
Unread 12-07-2020, 05:07 PM   #9
Member
joe breda
PGCA Member

Member Info
 
Join Date: Sep 2012
Posts: 48
Thanks: 0
Thanked 112 Times in 20 Posts

Default

Yes TIG welded
joe breda is offline   Reply With Quote
Unread 12-13-2020, 12:22 PM   #10
Member
John Berry
Forum Associate

Member Info
 
Join Date: Jul 2009
Posts: 5
Thanks: 0
Thanked 1 Time in 1 Post

Default

How big of a hassle is it to turn one of these guns into an extractor operation and avoid all these ejector issues? Is it something you can do yourself and if not is there anyone in central Missouri you fellows are aware of that is qualified to do the work? I have a 28ga. that I hunt with and save all the hulls for reloading anyway.
John Berry is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:24 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2021, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.