Pressure Test for 19gn Red Dot
I sent the following three loads to Tom Armburst for testing, a scan of the tests is below. Loads where hand weighted as below:
A. 10ga. Federal hull cut to 2 7/8”, WW 209 primer, 19gr Red Dot, Remington SP-10 wad, 2x .125 card wads and 1 .70 card wad in bottom of wad, 1.125oz # 7 ½ lead shot.
B. 10ga. Remington hull cut to 2 7/8”, WW 209 primer, 19gr Red Dot, Remington SP-10 wad, 3x .125 card wads in bottom of wad, 1.125oz # 7 ½ lead shot.
C. 10ga Cheddite hull cut to 2 7/8", Remington SP-10 wad, 3x .125 card wads in bottom of wad, 1.125oz # 7 ½ lead shot.
THIS IS NOT A RECOMMENDATION FOR INFORMATION ONLY. Pressure higher than I hoped for was hoping for 5200+- equal to black.
Craig Larter
|
Threaded Mode